ElyxAI

Crop costs in Excel: which field is over the limit you typed

Farm ManagerCrop Cost Tracker

A crop cost sheet is one row per field for one season word. You type the field, the crop, the season, the area in hectares, the cost you already added up, and the limit per hectare. Cost per hectare is that cost divided by the area while the row is open and the area is not zero. The window says over when that result is above the limit, and ok when it is equal to the limit or below it. The first screen is a sheet named Parcels. Row 1 is the header. Row 2 is one field you can check by hand: area 10, cost 4500, limit 500, status open. Cost per hectare is 450. The window is ok. There is no selling price and no menu dish on that screen. This sheet is not a single unit-cost cell. That cell divides one total by a number of units. This list keeps one field per row, with the area and the cost you typed. It is not a product margin, which is a shelf price minus a unit cost. It is not a restaurant menu. The season is a word you type so two seasons on the same field stay on two rows. You type the cost. The question is which open row is over the limit you typed. Closed rows drop out of the window. They stay on the sheet. An area of zero stays blank, so the sheet does not show a divide-by-zero error. Elyx can write the cost per hectare and the window. You still type the area, the cost, and the limit. The trial lasts 7 days, with no card.

The Problem

The cost fails when it lives in a notebook. A sentence says field N2 was expensive. Nobody can compare fields, because the area and the cost are not on the same row. A sentence without those two numbers is not a cost per hectare. A second failure is mixing this sheet with a product margin or a menu. A margin row answers what a selling price leaves after a unit cost. A menu row answers the price of a dish. A unit-cost cell answers one total divided by one quantity of output. If you paste shelf prices, dishes, or a single factory total here, the morning count no longer means fields over the limit you typed. Keep this sheet to fields, hectares, and the cost you typed. A third failure is deleting a field when the season ends. Set the status to closed and leave the row. The cost per hectare goes blank. Deleting the row removes the only record of the 10 hectares and the 4500 you already typed. The sheet still does not decide what the cost should have been.

Benefits

Each field is one row with an area, a cost, and a limit per hectare you typed.

Cost per hectare is cost divided by area while the row is open and the area is not zero.

Over means the result is above the limit. Ok means it is equal to the limit or below it.

Closed rows stay on the sheet and drop out of the over count.

The season is a label. It is not a price.

Step-by-Step Tutorial

1

Create the list and the header

Name the sheet Parcels. In row 1 type: Field, Crop, Season, Area, Cost, Limit, Status, PerHa, Window, Note. Field is the parcel name. Crop and Season are words you type. Area is hectares. Cost is the amount you already added for that field. Limit is the cost per hectare you do not want to pass. PerHa and Window are formulas. Status is a word from a list. Note is optional. Freeze row 1. Do not merge cells.

One row per field and season. A second season on the same field is a second row. Do not pack two seasons into one cell.

2

Lock the status words

Select Status from row 2 down. Data, Data Validation, List. The source on a sheet named Lists is open and closed. Open means the field is still in the morning count. Closed means you are done with that season. Only open stays in the window. People must pick a word. A synonym such as done or finished will not match the formulas. The list is a filter. It is not a selling price.

Area, Cost, and Limit are numbers. Do not type the word over in those columns.

3

Enter five fields you can check by hand

On row 2 type field N1, season 2026, area 10, cost 4500, limit 500, status open. You will predict 450 per hectare and window ok. On row 3 type field N2, area 4, cost 2800, limit 500, status open. Per hectare should be 700 and window over. On row 4 type field N3, area 8, cost 4000, limit 500, status open. Per hectare should be 500 and window ok, because equal is not over. On row 5 type field N4, area 0, cost 900, limit 500, status open. Per hectare and window should go blank. On row 6 type field N5, area 6, cost 4200, limit 500, status closed. Per hectare and window should go blank. Use these amounts before you trust the formulas.

If you do not know the cost yet, leave Cost blank. The result stays blank. Do not type zero unless the cost really is zero.

4

Write the cost per hectare

The result is blank when status is closed, or when Area, Cost, or Limit is blank, or when Area is 0. Otherwise it is Cost divided by Area. With Area in D2, Cost in E2, Limit in F2, and Status in G2, use =IF(OR(G2="closed",D2="",D2=0,E2="",F2=""),"",E2/D2). Format as a number. 4500 divided by 10 is 450. The limit is not inside this division. It is only used by the window.

=IF(OR(G2="closed",D2="",D2=0,E2="",F2=""),"",E2/D2)

4500 divided by 4 is 1125, not 700. Row 3 is 2800 divided by 4, which is 700. If you see another number, the cells are not the amounts you typed.

5

Write the window

The window is blank in the same cases as the cost per hectare. Otherwise it is over when Cost divided by Area is above Limit, and ok when that result is equal to the limit or below it. Use =IF(OR(G2="closed",D2="",D2=0,E2="",F2=""),"",IF(E2/D2>F2,"over","ok")). Over means above the limit you typed. Ok includes a result that equals the limit. The crop name is not in this formula.

=IF(OR(G2="closed",D2="",D2=0,E2="",F2=""),"",IF(E2/D2>F2,"over","ok"))

Do not treat 500 on an 8 hectare field with a cost of 4000 as over. 4000 divided by 8 is 500, and 500 is not above 500.

6

Count and add the over rows

On a sheet named Morning, the over rows are =COUNTIFS(Parcels!I:I,"over"). With the five rows above, that count is 1: field N2, 700 per hectare. The cost on over rows is =SUMIFS(Parcels!E:E,Parcels!I:I,"over"), which is 2800. That sum is the cost you typed, not the cost per hectare. Field N1 at 450 and field N3 at 500 are ok, so they stay out. Field N4 is out because the area is 0 and the window is blank. Field N5 is out because status is closed. A blank window is not over. Write the rule next to the count.

=SUMIFS(Parcels!E:E,Parcels!I:I,"over")

Do not add 450 and 500 into the over sum. Ok is a different word, so SUMIFS leaves those costs out.

7

Read a zero area as a blank, not as an error

If Area is 0 and status is still open, the cost per hectare stays blank. That is a row to fix, not a row that is over. Either the area was not typed yet, or a zero was typed by mistake. Do not replace the blank with a huge number. A result on a closed row should not happen, because closed blanks the cell. If you see a number on a closed row, the formula was overwritten. Field N5 would have been 4200 divided by 6, which is 700, but the closed status keeps it off the morning list.

Filter Window to over for the morning list. Filter Season to 2026 when you only want that word. Filter Status to closed when you need history.

8

Check the five rows before you share the count

Area 10 and cost 4500, limit 500, status open: 450 per hectare, window ok. Area 4 and cost 2800, status open: 700, window over. Area 8 and cost 4000, status open: 500, window ok. Area 0 and cost 900, status open: blank. The same 6 hectares and 4200 with status closed: blank, and the over count ignores the row. The over count is 1, and the cost on that row is 2800. If a check fails, fix the area, the cost, the limit, or the status word before you send the count. The count is only this sheet. It is not a selling price, and it is not one unit-cost cell.

Write the five checks on Morning if more than one person updates the fields.

Template Features

Cost per hectare while the row is open

Cost divided by area. Blank when status is closed, a number is empty, or area is zero.

=IF(OR(G2="closed",D2="",D2=0,E2="",F2=""),"",E2/D2)

Window from that result

Over when cost per hectare is above the limit. Ok when it is equal or below.

=IF(OR(G2="closed",D2="",D2=0,E2="",F2=""),"",IF(E2/D2>F2,"over","ok"))

Over count

COUNTIFS reads the window word. With the sample rows the count is 1.

=COUNTIFS(Parcels!I:I,"over")

Cost on over rows

SUMIFS adds the cost you typed where the window is over. The sample sum is 2800.

=SUMIFS(Parcels!E:E,Parcels!I:I,"over")

History stays on the sheet

Closed rows remain. They leave the over count because the window is blank.

Concrete Examples

450 per hectare is inside the limit

Field N1 has 10 hectares and a cost of 4500. The limit you typed is 500. You do not want it on the morning list.

Area: 10. Cost: 4500. Limit: 500. Status: open.

Result: Cost per hectare is 450. Window is ok. The over count does not include the row.

700 per hectare changes the count

Field N2 has 4 hectares and a cost of 2800. The same limit is 500.

Area: 4. Cost: 2800. Limit: 500. Status: open.

Result: Cost per hectare is 700. Window is over. The over count is 1. The cost sum of over rows is 2800.

Equal to the limit stays ok

Field N3 has 8 hectares and a cost of 4000. You do not want a tie counted as over.

Area: 8. Cost: 4000. Limit: 500. Status: open.

Result: Cost per hectare is 500. Window is ok. The over count stays 1. Closing a row blanks the result and leaves the amounts on the sheet.

Pro Tips

Zero cost is a number

Type 0 only when the cost really is zero. A blank cell means you do not know yet, and the result stays blank. 0 divided by 10 is 0 per hectare and a window of ok when the limit is above 0.

Season is a label

2026 lets you filter. The window formula never reads the season. A second season on the same field is another row, with its own area and cost.

Text amounts do not divide

If Cost was pasted as text, E2/D2 will not be 450. Re-enter 4500 and 10 as numbers. Then read the window again.

Distinct from a unit cost and a margin

A unit-cost cell is one total divided by units of output. A product margin is a shelf price minus a unit cost. A menu is a dish price. Do not paste those rows here and expect this count to mean the same thing.

Formulas Used

Don’t want to do it by hand? Ask Elyx

Example request

“Build this in my workbook: Cost per hectare by field, with the formulas, totals and formatting”

Elyx does it directly in your Excel file.

7 days free · No credit card required

Related guides

Frequently Asked Questions